• Aluminum (All Alloys)
• Aluminum (T1/T2)
• Brass
• Cold Rolled Steel
• Copper
• Galvanized Steel
• High Strength, Low Alloy, Steel
• Hot Rolled Steel
• Steel (All Alloys)
• Titanium
• Zinc

We also have (1) Well Saw and (1) Scotchman Miter Saw for production.

Shearing Diagram

• 133" Knives
• 33" From Bed to Floor
• 15 HP Main Drive
• T-Slots in Table
• Stroke Cycle Selector

• 10'
• 10' x .250 Steel Capacity
• CNC Front Gauge System
• Pneumatic Sheet Supports
• 60 Strokes Per Minute
• Electromagnetic Clutch
• Hydraulic Hold Downs

• Frame can be tilted right of vertical to any angle up to 45° for Miter Cutting.
• Allows For Angle Positioning in increments of 1°.
• Piece Counter
• Blade Tension control
• Movable Guide Arm
• Single or automatic cycles.

• 10" x 10" Capacity
• 7" x 10" W/ Blade @ 45°
• 12' Blade Length
• 1" Blade Width
• .035" Blade Gauge
• 22" x 24" Table Surface
• 22" x 32" Discharge Table
• 60-400 FPM Blade Speeds
• 0-250 LBF Feed Force
• 5,000 lb Max. Shuttle Wt.
• 15" Max Length W/ 1 Cycle
• 2 Hydraulically Pwrd Vises

The PC60 features 60 degree mitering in both directions and a standard 3 degree canted column for maximum versatility and high production cutting. The time tested Marvel PCII control, with it's user-friendly keypad and display, offers storage of up to 99 jobs as well as built in self-testing and diagnostic features. The Marvel PC60 combines an electric blade drive with sensor less vector control, full stroke hydraulic vising, and a 24" index table with electronic measuring for increased accuracy and minimal cycle times. 

Unique Cam Link Tilt Design Offers smooth, rapid, and accurate tilting (both left and right) for your wide array of cutting needs.

• 20" x 25" Capacity
• 20" x 17" Capacity @ 45 Degrees
• 20" x 11-1/4" Capacity @ 60 Deg.
• 1.25 x .042 x 17'-6" Blade Dims.
• 23" Wheel Diameter
• 7.5 HP Blade Drive Motor
• 1/8 HP Coolant Motor
• 50-650 FPM Blade Speed
• Sensor less Vector Control - Blade Drive
• Hydraulic Adjustable - 45,000 PSI Max Blade Tension
• Hydraulic Full Stroking Vises
• 0-350 lbs of Feed Force
• Recirculating Linear Ball Ways - Column Travel
• 60 gal. Coolant Capacity